Specialty Env Test Chambers
Aging laboratory
  • Model:Bir-13
  • Volume:13m³
  • Temp Range:R.T+5℃~+60℃
  • Temp.Fluctuation:±0.5℃
Products introduction

The aging test room usually consists of an enclosure system, an air duct system, a temperature control system, and an indoor test framework. It is a high-temperature, harsh-environment test equipment for high-performance electronic products, and it is widely used in power electronics, computers, communications, biopharmaceuticals, security, lighting and other fields.


Product aliases: high temperature aging test room, constant temperature aging room, high temperature aging room/burning machine room.

Technical parameters
Model BIR-13
工作室容积m³ 13m³
Inner chamber size Wied 3100mm
High 2100mm
Deep 2000mm
Exterior chamber size Wide 4700mm
High 2400mm
Deep 2200mm
Temp.Range R.T+5℃~60℃ (normal temperature +10°C--120°C) (can be customized according to requirements)
Temp.deviation ≤±2.0℃
Temp.fluctuation ±0.5℃
Temp.uniformity ±1℃~5℃
Heating time 60℃以下≤30min(61℃~85≤45min)
Noise ≤65分贝(dB)(The noise detection device is measured at a distance of 1m from the equipment gate)
chamber door One door W1050*H1900mm, open to the left
Exterior chamber material High-quality cold-rolled steel plate, surface electrostatic powder baking paint, color is warm gray
Inner chamber material SUS304 stainless steel plate, thickness: 1.2mm, the inner tank is fully welded and welded
Insulation material Rigid polyurethane foam insulation layer, thickness = 100mm, flame retardant grade B2
Observation window 1 observation window on the front wall (W700*H750mm) 1 observation window on the door W400*H500mm
Temperature control method PID+SSRAdjustment method
Control Panel Temperature controller, start switch, emergency stop switch, buzzer
Standard accessories Lead holes: 3 with a diameter of φ150mm, equipped with silicone plugs, located on the front of the box
power supply 380V AC(±10%)50Hz±0.5Hz
Test accuracy GB11158 high temperature test chamber technical conditions;
GB/T2423.2-2001 high temperature test chamber test method;
IEC60068-2-2.1974 high temperature test chamber test method;
GJB150.3 high temperature test

Product features

◎ The industry's first application of fluid simulation design technology and product process manufacturing technology, the product is more energy-efficient.


◎ High-strength fully welded non-slip bottom plate, small deformation and long life.


◎ Independent research and development of the controller operating system: wider programming capabilities, more convenient operation, multi-level password management.


◎ Through the local area network (LAN) RS232/485 connection to form the test and control network of the laboratory, realize remote monitoring, and facilitate user system integration and automatic monitoring.


◎ Integral and modular (library assembly) design, flexible combination, easy disassembly and assembly.